Call Anytime
(03) 6361 6444

Interior Painting Hobart

A comprehensive guide on how we at Painters Hobart do and recommend to be completed an interior painting project from start to finish for the best results.

 

Before starting an interior painting project, there are a few key things to keep in mind that will ensure success:

  •  Choose the right paint. Not all paints are created equal! Some are better suited for certain surfaces and environments than others. Doing your research ahead of time will save you a lot of headaches (and heartache) down the road.
  • Prepare the surface. This cannot be overstated. If you don’t take the time to properly prep the surface, your paint job will not only look bad, but it will also be more susceptible to damage and wear.
  • Use the right tools. Again, not all painting supplies are created equal. Using high-quality brushes, rollers, and other tools will make your life much easier and produce better results.

 

Now that we’ve got that out of the way, let’s get down to business!

 

 

Step 1: Choose Your Paint

best paint brands in Australia

As we mentioned before, choosing the right paint is crucial to the success of your project. Not all paints are created equal, and some are better suited for certain surfaces and environments than others.

Some things to keep in mind when choosing paint:

  •  The type of surface you’re painting. Different paints perform differently on different surfaces. For example, water-based paint is a good choice for most walls, but oil-based paint is better suited for trim and cabinets.
  • The sheen level of the paint. The three most common sheen levels are flat, low-sheen, and semi-gloss. Flat paint has very little shine, while semi-gloss paint has a high level of shine. Choosing the right sheen level will depend on the surface you’re painting and the look you’re going for.
  • The color of the paint. This one is pretty self-explanatory, but it’s important to choose a color that you love and that will complement the other colors in the room.

 

Step 2: Prepare the Surface

Interior Painting Preparation

Properly preparing the surface you’re going to paint is absolutely essential to the success of the project. If you don’t take the time to prep the surface, your paint job will not only look bad, but it will also be more susceptible to damage and wear.

Some things to keep in mind when preparing the surface:

  • Protect floors and contents. Cover floors and furniture with drop cloths or plastic sheeting to protect them from paint splatters and drips.
  • Remove hardware. Remove all doorknobs, hinges, switch plates, etc. from the surface you’re painting. This will make painting easier and produce a cleaner finish.
  • Check for any peeling surface. If there is any paint that is peeling, sand it down until the surface is smooth.
  • Fill in any holes or cracks. Use putty or joint compound to fill in any holes or cracks in the surface.
  • Sand all surfaces. Once you’ve filled in any holes or cracks, sand the entire surface to create an even finish.
  • Clean the surface. Make sure the surface is free of dust, dirt, and grease. You can do this by wiping it down with a damp cloth or using a vacuum.

 

Step 3: Priming the Surface

Interior-Painting

Priming the surface you’re going to paint is important for a few reasons. First, it will help the paint adhere better to the surface. Second, it will help to cover up any dark colors or stains. And third, it will help to create an even finish.

 

Step 4: Re-Check for any Imperfection

Before you start painting, it’s important to check the surface one last time for any imperfections. Once you start painting, it will be much more difficult to fix any problems.

 

Step 5: Begin Painting!

Interior Painting

Now that the surface is prepped and ready to go, it’s time to start painting! Begin by painting the edges and corners of the surface with a brush. Once you’ve done that, use a roller to paint the rest of the surface.

If have experience using the spray gun, you can use that to paint the surface which will speed up the process.

 

Step 6: Let the Paint Dry

Once you’ve finished painting, it’s important to let the paint dry completely before moving on to the next step. Depending on the type of paint you’re using, this can take anywhere from a few hours to a few days.

Step 7: Add the Hardware Back

Once the paint is dry, it’s time to add the hardware back. Put all of the doorknobs, hinges, switch plates, etc. back on the surface.

Step 8: Stand Back and Admire Your Work!

You did it! You successfully completed an interior painting project. Now stand back and admire your work. If you’re happy with the results, then your job is done. But if you’re not quite satisfied, don’t hesitate to repaint the surface until you get the perfect finish or Call Us – Professional Painters Hobart to get Help

 

Painters Hobart,Painter,North Hobart,TAS